BIGBAG DISCHARGE - FIBC Bag EmptIer - BIg bag UnloadeD
BIGBAG DISCHARGE STATION
Powder or granular raw materials
are generally stored in the silos. And, on the other hand, if they
are delivered in big-bag sacks, the raw materials in the said
characteristic are directed to the target location as appropriate
for pneumatic or screw (spiral).
The basic station consists of:
- a vibrating bottom.
- a discharge funnel.
- a heavy stainles-steel frame.
The BigBag is attached to a hoist device for better handling. Following the hoist device with the BigBag is picked up by a hoist or a forklift and is manoeuvred over the vibrating bottom. The vibrating bottom is suspended in the heavy steel frame by means of spiral springs. A sideways mounted imbalance unit generates the vibrating action, to improve the product flow. The discharge funnel is integrated with the vibrating bottom and it is provided with a large access hatch to untie the outlet spout of the Big-Bag. Because the Big-Bag covers the funnel completely there is a closed system while discharging, which creates a dust-proof unit. The funnel is also provided with a flange-connection for a dedusting unit. The de-dusting also creates an air compensation while discharging. The heavy steel frame is a solid construction of completely closed and welded box profiles. In the funnel, beneath the access hatch, a screening-grid is mounted to intercept possible lumps and large pollutions. The grid is detachable.The right solution for Big Bags and sacks. Regardless of whether your raw materials are delivered in a sack, crate, Big Bag, bulk car or silo, the unloading and discharge process requires the greatest possible care and attention. Safety, quality and cost efficiency are paramount.
PDF
brochure
FOR FINE MATERIAL BIG BAG DISCHARGE
.
WORKING PRINCIPLES OF BIGBAG
DISCHARGE STATION
SWF(Inverter) brand, 2-ton capacity, 6m
chain, 4-action crane is attached to IPE 250 material on top of
the big-bag sacks stations. This crane advances forward, departing
from the main frame of the 1500 mm platform and comes forward to
lift the sack. Then the holding grabs of the sack are attached to
the hooks of the lifting cross and the sack is put to the
discharge cone with its mouth sealed by pneumatic cylinders. The
fastened inlet of the sack is unfastened. Then it is untied and
valve cylinders are opened within 1-10 scale according to the flow
status from the touch panel or the panel just near the operator.
When flow continues, the spiral conveyor or pneumatic transport
group connected to the inverter is enabled from the panel.
According to the flow condition, two vibrators in the station
start operate in interval. Thanks to these vibrators, both the
product in the big-bag sack falls down on the intermediate
collecting cone and the product in the intermediate collecting
cone falls on the conveyor. Configuration of the said vibrators,
pneumatic cylinders and spiral conveyors all are performed via the
touch panel.
Optionally, more than one station may be
connected adjacently and entire process may be displayed from a
single computer by SCADA
BigBag-Bulk Bag Discharge SELECTION
OF AVAILABLE OPTIONS:
- CLAMPING SYSTEM, to achieve a
dust-proof connection of the
outlet spout (very suitable for
hygienic applications and to form a
vacuum in the emptied
Big-Bag).
- DE-DUSTING UNIT, multiple types and sizes
available, attuned to
the product.
- BigBag Discharge
System, metering screw conveyors,
slide or rotary valves.
-
CLOSED HOUSING/CHAMBER for toxic or very dusty powders.
-
POWDER DIVERTER VALVE, to avoid contamination of the
product by
dust/dirt at the outside of the Big-Bag.
- VACUUM
SUCTION/DISCHARGE OF RESTS, by connecting to a
pipe with
integrated control valves, there will be a vacuum on the
Big-Bag. In this way an efficient discharge of rests (no air/dust
contents) will result.
- Bigbag Discharge ROLL UP SYSTEM, for
empty Big-Bags and/or Inliner to be placed
separately or
directly on top of the discharge position.
- Bigbag Discharge
MODIFIED VIBRATING BOTTOM, to activate very bad-flowing
Products additionally.
- Bigbag Discharge FEEDING ROLLER
CONVEYOR (automatically), for Big-Bags on
pallets (incl. pallet
stacker).
- MOBILE UNIT.
- WEIGHING SYSTEM, to monitor the
product flow.
- EXPLOSION-PROOF DESIGN, according
ATEX-directives.
- CONTROL SIFTING, with our centrifugal sifter
machine.
TECHNICAL DATA FOR BIGBAG DISCHARGE-BIG BAG UNLOADER
Material of construction: stainless steel, normal mild steel
or
combination of both.
Drive, vibrating bottom: 1 pcs. E-motor, P
= 0,5 kW.
Capacity: approx. 6-8 Big-Bags/h.
(depending on
product properties).
Dimensions of Bigbag
Discharge:1500x1500x5000mm
Max. height: 1000-1900 mm.
Max.
width: 1000 mm.
Max. length: 1000 mm.
Max. weight: 1500 kg.
Diameter outlet spout: 300 mm.
Length outlet spout: 500 mm.